JSS | Stepper Motor Driver | Luna Bearings

Adoption of 32-bit DSP, pure sine wave subdivision technology
Low-noise, low-vibration and low temperature rising
Voltage 18-50VDC
With 8 stalls output current setting, current range 1.0-4.2A
With 15 stalls microstep subdivision setting
Automatic half current, self-test, over voltage, under voltage, over current protection
Internal optical isolation, highest frequency response 200KHZ
Suitable for nema 23, nema 34 stepper motor current under 4.2A

DM556D 2-phase digital stepper motor driver

Features :

DM756D 2-phase digital stepper motor driver

Features :

Adoption of 32-bit DSP, pure sine wave subdivision technology
Low-noise, low-vibration and low temperature rising
Voltage 24-70VDC
With 8 stalls output current setting, current range 2.1-5.6A
With 16 stalls microstep subdivision setting
Automatic half current, self-test, over voltage, under voltage, over current protection
Internal optical isolation, highest frequency response 200KHZ
Suitable for nema 23, nema 34 stepper motor current under 5.6A

M660A 2-phase stepper motor driver

Features :

M860D 2-phase stepper motor driver

Features :

DM860D 2-phase digital stepper motor driver

Features :

Adoption of 32-bit DSP, pure sine wave subdivision technology
Low-noise, low-vibration and low temperature rising
Voltage 24-80VDC
With 8 stalls output current setting, current 2.4-7.2A
With 16 stalls microstep subdivision setting
Automatic half current, self-test, over voltage, under voltage, over current protection
Internal optical isolation, highest frequency response 200KHZ
Suitable for nema 23, nema 34 stepper motor current under 7.2A

DM860A 2-phase stepper motor driver

Features :

Adoption of 32-bit DSP, pure sine wave subdivision technology
Low-noise, low-vibration and low temperature rising
Voltage 24-80VAC
With 8 stalls output current setting, current 2.4-7.2A
With 16 stalls microstep subdivision setting
Automatic half current, self-test, over voltage, under voltage, over current protection
Internal optical isolation, highest frequency response 200KHZ
Suitable for nema 34, nema 42 stepper motor current under 7.2A

M1160A 110VAC stepper motor driver

Features :

M2280A 110-220VAC stepper motor driver

Features :

Adoption of bipolar constant-current chopper technology
Low-noise, low-vibration and low temperature rising
Voltage 110-220VAC
With 8 stalls output current setting, current 4.5-8.0A
With 28 stalls microstep subdivision setting
Automatic Half current, motor wires misconnected, over voltage, under voltage, over current protection
Internal optical isolation, highest frequency response 200KHZ
Suitable for nema 34, nema 42, nema 52 stepper motor current under 8.0A

2DM2280A digital stepper driver

Features :

Parameter auto-setup and motor self-test
Multi-Stepping inside
Small noise, low heating, smooth movement
Torque compensation in high speed
Variable current control technology, High current efficiency
Accelerate and decelerate control inside, Great improvement in smoothness of starting or stopping the motor
Storage the position of motor
Optically isolated input and compatible with 5V or 24V
User-defined micro steps
Microstep resolutions and Output current programmable
Over current, over voltage and low voltage protection
Green light means running while red light means protection or off line