HIWIN - Linear Motor

Single-Axis Motors

LMX1E-C Series

Features :

  • Max. acceleration 100 m/s2 (no load condition)
  • Max. speed 5 m/s (no load condition)
  • Length up to 4,000 mm
  • Peak force 580 N
  • Zero cogging forces from motor
  • Multiple forcers per stage available
  • Encoder options: optical or magnetic, incremental or absolute

LMX1L-S Series

Features :

  • Max. acceleration 50 m/s² (no load condition)
  • Max. speed 4 m/s (no load condition)
  • Length up to 4,000 mm
  • Peak force 2850 N
  • Multiple forcers per stage available
  • Encoder options: optical or magnetic, incremental or absolute

LMX1L-SC Series

Features :

  • Max. acceleration 50 m/s² (no load condition)
  • Max. speed 4 m/s (no load condition)
  • Length up to 4,000 mm
  • Peak force 2850 N
  • Multiple forcers per stage available
  • Encoder options: optical or magnetic, incremental or absolute

LMX1E-T Series

Features :

  • Max. acceleration 50 m/s²
  • Max. speed 5 m/s
  • Length up to 1,470 mm

Multi-Axis Motors

LMX1 Series Cross Tables

Features :

  • Available with iron-core or coreless motors
  • Rigid aluminum frame with low profile
  • Simple assembly
  • Orthogonality ±5 arc-sec
  • Repeatability ±0.002mm

LMG2A Series Gantry Systems

Features :

  • Fast acceleration
  • Available with iron-core or coreless motors
  • Rigid aluminum bridge
  • Simple assembly
  • Orthogonality ±5 arc-sec
  • Repeatability ±0.002/0.004mm

Planar Motors

LMSP Series Planar Motor

Features :

  • Low profile XY table
  • Closed loop
  • Air bearing free of wear
  • No externally measurable magnetic fields
  • Very low heat generation
  • Can be mounted upside down
  • Stator area up to 1000 x 1000 mm

LMDX Series Servo Drive

  • The servo drive LMDX for the planar servo motor LMSP is available in two different voltage versions and with an optional digital I/O interface card.

Components

LMS Series

Features :

  • 3-phase AC
  • High thrust
  • Excellent acceleration
  • Low cogging
  • Many stroke lengths
  • Several forcers possible on one stator
  • Peak force 2850 N

LMSC Series

Features :

  • 3-phase AC
  • Large force constant
  • Water cooling possible
  • Attraction force compensation
  • No attraction force introduction into the guide elements
  • Several forcers possible on one stator
  • Any stroke length
  • Peak force 5700 N

LMC Series

Features :

  • 3-phase
  • Extremely dynamic
  • Good synchronization and high speed consistency
  • Low inertia and high acceleration
  • Low profile
  • No cogging
  • Several forcers possible on one stator
  • Peak force 780 N

LMF Series

Features :

  • 3 phase
  • Water-cooling
  • UL certification
  • Low cogging
  • Unlimited stroke
  • Peak force 7328 N

LMT Series

Features :

  • 3-phase
  • Low mass and high acceleration
  • Extremely dynamic
  • Wide air gap and easy assembly
  • No cogging and no contact
  • No wearing
  • Multiple forcers
  • Peak force 980 N
TOP
Open chat
Need Help? Let's Chat